|
|
 |
| B.H. Hanson |
| Ph. (570) 689-4561 |
| Fax (570) 689-4562 |
|
|
New Products |
|
|
|
|
|
|
NEW PRODUCTS
|
|
Zenoah Engines And Parts In Stock And Ready For Delivery |
|
Pricing
includes shipping to most areas in the U.S.
|
|
Call and ask
about multiple engine discounts. (4 minimum) |
|
|
|
260 PUM, no
carb......................................................................... |
$195 |
|
260 PUM, 644 choke
carb........................................................... |
$215 |
|
260 PUM, 257
carb....................................................................... |
$220 |
|
270 PUM, 1mm stroker crank installed, 26.3cc, no
carb......
|
$230 |
|
270 PUM, 1mm stroker crank installed 26.3 cc, 257
carb.... |
$255 |
|
290 PUM, EZ pull recoil, no
carb................................................ |
$230 |
|
290 PUM ez pull recoil, 644
carb............................................... |
$250 |
|
290 PUM ez pull recoil, 257
carb............................................... |
$255 |
|
300 PUM 1 mm stroker installed 29.5 cc, no
carb................. |
$265 |
|
300 PUM 1mm stroker installed, 29.5 cc, 257
carb............... |
$290 |
|
1mm Zenoah stroker crank for PU
engines............................ |
$55 |
|
29 PUM top end kit....................................................................... |
$75 |
|
EZ pull
recoil................................................................................. |
$44.95 |
|
Zenoah RC Engines |
|
|
260 RC with clutch and
carb...................................................... |
$240 |
|
270 RC with clutch and
carb...................................................... |
$245 |
|
290 RC with clutch and
carb...................................................... |
$255 |
|
|
|
Zenoah 20 PUM E.I. |
|
 |
This little powerhouse
is smaller and lighter then other Zenoah PUM engines, but even
in stock form , puts out about as much power as a 231 PUM.
It can
use mounts made for a standard Zenoah PUM with easy
modification, and the exhaust port bolt spacing and size is the
same as standard Zenoah. It is supplied as shown with carb,
velocity stack, ignition box and recoil. We
have these in limited supply with full availability expected in
early spring.
Introductory price
$249.00 |
|
Click images to enlarge
|
|
|
|
Electronic Ignitions |
|
 |
These
efficient systems are made for conversion or replacement of
existing ignitions.
This kit is made to use 4.8-6 volt
battery source. It is designed for the standard RZ7C type spark
plug. It comes with ignition box, hall sensor, universal sensor
mount, switch pigtail, wire loom cover and RZ7C spark plug.
$55.00 "
Left "
This kit is made for direct replacement of
the Zenoah ignition box offering lower current draw for longer
battery life. The connector supplied plugs directly into the
Zenoah hall sensor and allows usage of an inline Stator Gator.
It comes with ignition box, switch pigtail, wire loom, Iridium
ICM-6 spark plug. $60.00
"right " |
|
Click images to enlarge
|
|
|
|
Switch
with Charge Receptacle Plug |
|
 |
Radio switch with built in charge
receptacle that is dirt protected behind a sliding door.
Included is the switch assembly with Futaba J type ends,
gasket, inner plate and mounting screws.
$7.95 |
|
Click images to enlarge
|
|
|
|
Kill
Switch |
|
 |
Designed to be used with our electronic
ignitions, this device plugs into a spare receiver channel and
will shut the ignition off from the transmitter. There is an LED
to show power on . $9.95 |
|
|
Zenoah 20 E.I. 90 degree intake |
|
 |
|
Zenoah 20 E.I. 90 degree intake faces your carb rearward
on this quality casting for more cowl space. Uses an
external pulse line on supplied nipples. linkage is
straight pull. Comes with all gaskets and heat isolator.
$39 |
|
|
Click images to enlarge
|
|
|
|
Zenoah 20 E.I. take-offs |
|
|
.jpg) |
|
These are new parts removed from Zenoah 20 EI engines. They may have a
tool mark on some of them from removal, but are as new
and unused. This will save you
BIG $$
off retail if you need these parts. It there's
something else you need, call for pricing. We do
quality repairs also and give fast service. Supply
will be limited on these parts.
|
20 E.I. Prop hub including Hub with sensor, Prop
washer, Nut, mounting stud.
$20 |
|
20 E.I. Muffler
$10 |
|
20 E.I. WT 811 carb
$30 |
|
20 or 26 E.I. ignition box
$40 |
|
|
|
Click images to enlarge |
|
|
|
|
|
|
|
