B. H. Hanson
B. H. Hanson
Ph. (570) 689-4561 Fax (570) 689-4562
Exhaust Systems
Our exhaust components are USA made and are properly fit to work together.
Beware of leaky light weight import copies that are sold as our exhaust system .
Insist on the best by purchasing a genuine B.H. Hanson Product.
Tuned pipes
Click image to enlarge
From left to right.
Tuned Pipe standard - To be used with wrap to center (WTC) and deep vee headers. Also good for 231 engines and high RPM 260 engines - $85.00
Tuned Pipe 1 inch band - To be used with 260 engines and all headers *EXCEPT* wrap to center and deep vee - $85.00
Tuned Pipe 2 inch band - To be used with 260 engines and all headers *EXCEPT* wrap to center and deep vee -$85.00
Tuned Pipe - Super Quiet - To be used with all engines. Measures 78 DB at 50 feet while still providing outstanding Horse Power - $175.00
Headers
Click image to enlarge
1. -90 Deg. header with 3 inch offset and 90 Deg. bend
2. - 90 Deg. header with 2 inch offset and 90 Deg. bend.
3. - 90 Deg. header with 1 inch offset and 90 Deg. bend.
4. - 100 Deg. header with one inch offset and 100 Deg. bend.
5. - 105 Deg. header with one inch offset and 105 deg bend.
6. -Wrap to flush header will put pipe approximately 1 3/4 inch from engine centerline.
7. -Deep Vee header. header with approximately 3 1/2 inch offset to put header in left side of boat.
8. - Wrap to center header. Puts the header at center of boat.
9. - 90/90 header with 1 inch offset and 2 1/2 inch rise
10. - 45/90 header with one inch offset and one inch rise.
11. - 45/90 header with one inch offset and one inch drop
12. -90 Deg. header with 25 Deg. angle down , one inch drop and 4 inch offset
13. 90 Deg. header with 25 Deg. angle down, one inch drop and 3 inch offset
14. 90 Deg. header with 25 Deg. angle down, one inch drop and 2 inch offset
All headers are $38.
BH Hanson Outboard exhaust system
Click image to enlarge
Flanges
Click image to enlarge
Two-piece Header Flange with Viton O-rings - The flange supports our headers in a water-cooled environment,
enabling the exhaust to remain cool and dry. - $45 specify for Zenoah or QuickDraw use.
Complete Exhaust System
165.00 ($135 if purchased with engine) - Includes a pipe (excluding Tuned Pipe-Super Quiet) , Water Cooled exhaust flange, and choice of header .
B.H. Hanson pipe stopper
This ring clamps to our 7/8th header pipe and stops the pipe from sliding towards the engine while holding the pipe firmly with Viton o-rings. It makes pipe adjusting easy using the ring as a reference point for length. The ring is properly sized so it wont scratch the header when sliding it on and there is no chance of radio noise or pipe damage as with other designs that use a metal piece that goes over the pipe nipple. $16.95
Click image to enlarge
Header coolers
Click image to enlarge
Header running hot? Use these coolers to bring down temps. Made to fit 7/8th headers. Air cooled on left $32.95. Water cooled on right $21.50
Click image to enlarge
Prices and description are listed left to right.
Helicopter Muffler - With gaskets and bolts. $29.50
Aircraft Muffler - With gaskets and bolts. $28.50
Stinger Marine Muffler - fits all BH Hanson marine tuned pipes - $36.00
BH Hanson Tuned Helicopter exhaust system - $229
At only 88 db's, it is extremely quiet yet very powerful.
Click image to enlarge
Click image to enlarge
Click image to enlarge
BH Hanson Tuned Helicopter exhaust system for left side exit. Approximately 24 inches in length measuring from the center of the exhaust port to pipe tip. 2 1/2 inch center to center rise. $229.00
Century Gas Torpedo V3 Tuned Muffler
This muffler is approximately 10 inches long and weighs 12.5 ounces. Its large volume will work well with our smooth running Heli engines and is a good alternative to the factory muffler for those that want to get the most power without adding one of our tuned pipe systems. This item is backed by a Century 1 year limited warranty. $135
Click image to enlarge